Soil tillage

Innovations in soil tillage

Catros+ 12003-2TX trailed compact disc harrow

AMAZONE will present the new generation Catros+ 12003-2TX in working widths of 12 m and 12.25 m at Agritechnica 2025. This innovative new development is characterised by a new chassis design and folding concept, together with a wide range of new equipment options. Particularly noteworthy is the greater selection of disc types and rear packers, and the extended disc element for use in controlled traffic farming systems.

More...

AutoLane – automatic tracking system for the Catros-2TX

AutoLane automatic tracking system for the Catros-2TX. Today, tractors with automatic track guidance are often used for soil tillage, which can follow fixed A-B lines or contour lines depending on the working width of the mounted seed drill. The A-B lines are set based on the working width and the mounting position of the implement.

More...

For those situations where there is no need for optional extras, the Catros+ 6003-2TS Special is a weight-optimised, affordable and high-performance option. (© AMAZONE: Catros_plus_6003-2TS_Special_Claas_d0_kw_DJI_0904_d1_250804_GO.jpg)

Catros+ 6003-2TS Special trailed compact disc harrow

Sometimes, less is more: high performance – and with an axle load of less than 3.5 tonnes. With the new Catros+ 6003-2TS Special, AMAZONE adds a weight-optimised and cost-effective variant to its range of trailed compact disc harrows in a 6 metre working width.

More...

Ultra-shallow soil tillage with the TopCut 6000-2 mounted cutting roller combination for optimum shredding. (© AMAZONE: TopCut6000-2_Steyr_d0_kw_DJI_20250410102628_0157_d1_250811_GO.jpg)

TopCut 5000-2 and 6000-2 mounted cutting roller combinations

Ultra-shallow soil tillage: Soil tillage is becoming increasingly important in arable farming, especially in view of the growing challenges posed by drought, chemical resistance and the requirements to reduce the use of plant protection agents. A key role is played by ultra-shallow soil tillage, stubble cultivation and catch crop management.

More...

TopCut 12000-2T cutting roller combination

TopCut cutting roller combination with various different tool options for different crops. AMAZONE has developed the TopCut cutting roller combination to meet the increasing requirements for ultra-shallow soil tillage. It consists of up to three consecutive tool segments plus a rear segment that can each be equipped with various different tools to suit the customer’s needs and requirements

More...

Folding Cenio 5000-2 for shallow stubble cultivation through to topsoil deep loosening (© AMAZONE: Cenio5000-2_Claas_d0_kw_P9039054_d1_250729_GO.jpg)

Cenio 5000-2 mounted cultivator

At Agritechnica 2025, AMAZONE will be presenting the Cenio 5000-2, a hydraulically-folding, mounted mulch cultivator in a working width of 5 metres. This new model extends the Cenio portfolio, which previously comprised of implements in working widths of 3 metres, 3.5 metres and 4 metres. The Cenio 5000-2 is suitable for tractors with power ratings at or above 220 hp.

More...

FW 580 flex ring roller for mounted implements

AMAZONE introduces the FW 580 flex ring roller, a new packer roller for the Cenio and Cenius mounted cultivators and Catros mounted compact disc harrows. Thanks to its open design with a ring spacing of 200 mm and its narrow roller core, the roller, with a total diameter of 580 mm, is suitable for a broad range of applications.

More...

SoilDetect - measuring soil conductivity

As part of the BMLEH's Soil4Climate joint project, AMAZONE is working with partners Field-Expert GmbH, exatrek GmbH, Osnabrück University of Applied Sciences and JKI on a system for recording soil conductivity during soil tillage. The project was initiated by the Lukas and Dr Joachim Brunotte practice, funded by the BMLEH and successfully trialled at two locations in northern Germany.

More...

The new Teres 200 S stepped adjustable plough (© AMAZONE: Teres200S_Case_d0_hm_DJI_0009_d1_250804_GO.jpg)

The Teres 200 mounted reversible plough with new stepped variants

With the Teres 200, AMAZONE offers a modern plough that is characterised by its high efficiency, robust construction and practice-oriented levels of equipment. The range comprises of 2 variants: The Teres 200 V and Teres 200 VS Vario ploughs with variable hydraulic working width adjustment introduced at the beginning of the year, and now the new Teres 200 and Teres 200 S stepped ploughs with manual working width adjustment to be presented at Agritechnica 2025.

More...

Tyrok 400 semi-mounted reversible plough in 5 or 6 furrows

Maximum performance, compact and easy to adjust! AMAZONE is expanding its range of semi-mounted reversible ploughs with a smaller model, the Tyrok 400 as a 5-furrow base machine. This can be supplemented with an additional furrow, producing a compact 6-furrow semi-mounted reversible plough that impresses with very good boundary ploughing properties.

More...