IceTiger winter salt spreader

With a base capacity of 380 or 1,000 litres, the hopper on the IceTiger offers plenty of space for the spreading material – meaning prolonged periods of use. Filling times and downtime can be minimised, so that the work can be quickly completed. The hopper capacity can be extended by use of a variety of extensions, up to 920 litres for the IceTiger S and up to 1,900 litres for the IceTiger. Dozens of kilometres of road can be treated at standard application rates and working widths, such as 10 g/m² and 4 m. Long range, big impact!

Both free-flowing refined salts with a low moisture content and heavy rock salt with a high moisture content can be applied with the IceTiger‘s precision spreading disc without blockages. Salt and FS30 pre-wetted salt can be applied from 5 g/m² to 80 g/m² and grit up to a maximum of 300 g/m². 

• W 1 precision spreading disc: working widths 1.5 to 5.5 m 
• W 2 precision spreading disc: working widths 2 m to 8 m

Bridging is safely avoided thanks to the hydraulically driven floor belt with its large surface contact area to the spreading material. A hydraulic motor allows the speed of the floor belt to be precisely adjusted to run fast or slow, so that even extremely small rates down to 5 g/m² can be applied. A spring-loaded shutter with a chain curtain lets smaller foreign objects pass through.

Optional equipment for the IceTiger with a hopper capacity from 1,300 litres: the pre-wetted salt system for FS30 pre-wetted salt with a brine content of 30% includes a hydraulic brine pump which provides a precisely adjustable supply of brine from the two plastic tanks, each with a capacity of 250 l.

• The tanks are integrated in the overall concept, so that the spreader remains close to the tractor with a favourable centre of gravity.  
• Solid salt and brine are mixed together in free fall between the hopper and spreading plate. 
• The mixing results in a reduction in the overall salt content by approx. 23% compared to dry salt.

Pre-wetted salt system with an overall tank capacity of 500 l for the application of FS30 pre-wetted salt.

During the winter months, the IceTiger reliably spreads any material - salt, sand or grit. However, the IceTiger can also be used in a variety of ways outside the winter months, e.g. for spreading chippings during path maintenance.

The most important components of the IceTiger, such as the precision spreading disc, are made of high-quality stainless steel for long-term use in winter spreading. A special multi-layer paint finish is also used for the other components to prevent corrosion from the aggressive spreading materials.

Superior multi-layer paint finish

 

The best from all angles:
1. 14-step paint preparation, e.g. degreasing
2. Zinc phosphating prevents rust infiltration
3. Thick primer layer for full-surface corrosion protection even in those nooks and crannies and hard-to-reach areas
4. Powder coating for a high-quality appearance and high paint strength for reliable protection from everyday wear and tear

Clearing at the front, spreading at the back

Snow clearing equipment is an ideal addition to the IceTiger and IceTiger S from AMAZONE

The road is cleared of snow on the front and then gritted at the back for safe driving. Cleared and gritted roads in just one pass, for effective winter safety.