Cenius-2TX trailed cultivator

An extensive range of attachment options are available to suit any tractor and for all the cultivators. The flange plate allows the easy and quick mounting of any of the linkage options. In addition, the category of the lower linkage can be quickly changed. Only the linkage pins are interchanged for this purpose. As a result, the appropriate linkage can be selected for any tractor, no matter whether Cat. 3, 3N, 4 or 4N lower link cross shafts, various towing eyes or the K80 ball coupling are used.

• Increase in tractor traction  
  – Power transmission from the Cenius to the rear tractor axle
  – Additional weight up to 1,500 kg on the rear axle
• Reduction in wheel slip
• Increase in area coverage
• Reduction in fuel consumption

1. +1500 kg

Operational reliability under all circumstances

If it is intended to adjust the working depth whilst on-the-move to react to varying soil conditions or to repair harmful compaction, the optional fully hydraulic working depth adjustment is recommended. The working depth adjustment is carried out hydraulically via the support wheels and the rear roller as an option. Manual working depth adjustment via spindles is also available as an alternative. 

It can be an advantage to allow the transport wheels to run in parallel on highly pressure-sensitive soils. The running gear thereby lightens the load on the rear roller. This is also not a problem for the Cenius-2TX.

In very wet conditions, in late autumn or when leaving the field to overwinter, the Cenius-2TX can be operated without a depth roller. In this special case, the running gear serves as the depth control. The tines at the rear of the wheels serve as wheel mark eradicators to ensure a level finish.

"Due to the bolted clamps the roller can quite easily be removed for wet conditions or for leaving a coarse ‘autumn furrow’. (traction magazine – working test of AMAZONE Cenius 5003-2TX Super · 3/2016)