Cenius mounted cultivator

For the rigid 3 m and folding 4 m Cenius

• For operating conditions with infrequent overloading 
• Protects the frame against excessively high forces 
• Must be manually reset after triggering 
• Trigger force 2,500 kg

For every Cenius and Cenius-2TX

• For operating in conditions with an occasional overload 
• Protects the frame against excessively high forces 
• Automatically resets after triggering – high force ensures a reliable reset 
• Trigger force 600 kg for high operational reliability

1. 600 kg at the point
2. 30 cm

The separation of guide plate from the share point above all serves to reduce wearing metal costs. Depending on soil type, location and soil moisture, 3 to 5 share points can be worn prior to exchanging the guide plate. The new guide plates on the C-Mix share system are manufactured with a spiral design that ensures, in combination with the optimum radius of the guide plate, the perfect deflection of the soil flow and thus a very high mixing intensity but yet with a lower power requirement. With the proven C-Mix share system AMAZONE offers a wide range of soil-engaging shares.

The right type of share for every field of application

1. C-Mix duck foot share 320 mm, 3 – 10 cm
2. C-Mix wing share 350 mm* / 360 mm**, 5 – 15 cm
3. C-Mix point 100 mm with guide plate 100 mm, 10 – 20 cm
4. C-Mix point 80 mm* with guide plate 80 mm, 12 – 30 cm
5. C-Mix coulter 40 mm*, 20 – 35 cm

*also as HD variant
**only for the mounted Cenius

The 350 mm wing share, the 80 mm point and the 40 mm share are also available as a hardwearing HD version especially for particularly high output rates. The share length remains constant over the entire service life. This means that no readjustment of the working depth is necessary. Depending on application and soil conditions, the service life is up to five times longer than with the standard points.