Teres 300 mounted reversible plough

The uncluttered hose rail enables optimum hose routing to the tractor. So nothing stands in the way of quickly attaching the plough. The hose rail sits completely behind the headstock in the working position.

The hollow, over-dimensioned turnover shaft on the Teres 300 with a diameter of 130 mm allows for 2 equally sized bearings. This markedly increases durability. At the same time, the turnover shaft enables clean routing of the hydraulic pipes without the hoses being damaged.

The bearing-mounted ProtectShaft cross-shaft with integrated lower link balls ensures low levels of wear and maximum durability. The pivot bearings have a dampening effect and protect the plough on the headland and when driving on the road. Thanks to the integrated balls, the durability of the cross shaft is increased markedly on account of the larger diameter. The cross-shaft with a fixed pin including lower link balls and Walterscheid clamp type guide cones is available as an alternative.

The electric, pre-selection switchbox and an electro-hydraulic control block mean that several functions can be operated with just one spool valve. The functions for adjusting the furrow width, furrow depth and the front furrow can then be individually selected with the rotary switch.

The advantages of Comfort Hydraulics 

• Full and comfortable operation using just one spool valve 
• Convenient adjustment from the cab 
• Reduced demand required when coupling

1. Working width
2. Front furrow width
3. Working depth