Cenius-2TX trailed cultivator

For every Cenius and Cenius-2TX

• For operating in conditions with an occasional overload 
• Protects the frame against excessively high forces 
• Automatically resets after triggering – high force ensures a reliable reset 
• Trigger force 600 kg for high operational reliability

1. 600 kg at the point
2. 30 cm

C-Mix Ultra tines with hydraulic overload protection

• For operating in conditions where there is regular triggering 
• Protects the frame against high forces 
• Damped via the hydraulic cylinder when it is reset after triggering – less wear in conditions with a large number of trip cycles 
• Adjustable trip force from 600 to 800 kg for tailored operational reliability

Ultra overload safety device for the most strenuous of conditions

The strengths of the C-Mix Ultra tine becomes apparent in challenging soil conditions where the tine protection system is being regularly triggered. This hydraulic variant enables the trigger force to be adapted to the conditions and is steplessly adjustable up to 800 kg. This provides a high level of operational reliability, because the machine optimally maintains the desired working depth of up to 30 cm even under the toughest of conditions thanks to the high trip clearance of the individual tines. In addition, the Ultra overload protection system protects the cultivator in a unique way: the system, consisting of the hydraulic cylinders installed on the tines and the central nitrogen accumulators, provides a highly damped resetting of the C-Mix Ultra tine after triggering. This also has a very beneficial effect on the wear and tear of the overload protection system, even in the case of frequent triggering. The number of nitrogen accumulators is adjusted to the respective number of tines so that there is only a small pressure difference when several overload protection devices are triggered simultaneously.

Stepless adjustment

Stepless adjustment of the system is easily and conveniently carried out from the front on the drawbar. The pressure gauge is also located there and can be easily viewed from the tractor cab for convenient monitoring.

The separation of guide plate from the share point above all serves to reduce wearing metal costs. Depending on soil type, location and soil moisture, 3 to 5 share points can be worn prior to exchanging the guide plate. The new guide plates on the C-Mix share system are manufactured with a spiral design that ensures, in combination with the optimum radius of the guide plate, the perfect deflection of the soil flow and thus a very high mixing intensity but yet with a lower power requirement. With the proven C-Mix share system AMAZONE offers a wide range of soil-engaging shares.

The right type of share for every field of application

1. C-Mix duck foot share 320 mm, 3 – 10 cm
2. C-Mix wing share 350 mm* / 360 mm**, 5 – 15 cm
3. C-Mix point 100 mm with guide plate 100 mm, 10 – 20 cm
4. C-Mix point 80 mm* with guide plate 80 mm, 12 – 30 cm
5. C-Mix coulter 40 mm*, 20 – 35 cm

*also as HD variant
**only for the mounted Cenius

The 350 mm wing share, the 80 mm point and the 40 mm share are also available as a hardwearing HD version especially for particularly high output rates. The share length remains constant over the entire service life. This means that no readjustment of the working depth is necessary. Depending on application and soil conditions, the service life is up to five times longer than with the standard points.