Automatic regulation via Flow-Controll – Operates just like using one large tank

Automatische Steuerung durch Flow-Control (1) FLOWCONTROL FÜR MARKETING_mit_Nummern_2

Electronic fill level management system

The specific feature of the FT 1001 is the 100 % integration of the front tank into the mounted sprayer via the Flow-Control electronic fill level management system in the ISOBUS terminal. The technological basis of Flow-Control is the two electronic fill level indicators in the tanks and the two high capacity injectors. The transfer rate in each direction is up to 200 l/min. The liquid in both spray tanks is always ideally homogenised.

The ISOBUS terminal automatically controls the liquid circuitensuring, always, an optimised weight distribution. Premature reduction of the load on the front axle is prevented. Depending on the fill level, new liquid is delivered from the front tank soon enough so that the rear sprayer tank is never emptied prior to the front tank. The liquid always remains homogeneous.

Manual control also allows the transport of just fresh water in the front tank.

Automated liquid flow via Flow-Control:

  1. AmaTron 4
  2. High capacity injectors 
  3. Switch valves for injectors
  4. Electronic fill level indicators
  5. Flow-Control pump 115 l/min
  6. Internal cleaning
  7. UF spray pump
  8. Spray line

The plant protection sector will have to change in the future

The plant protection sector will have to change in the future. Plant protection is an important part of agriculture in securing high yields and optimum quality. Due to the increasing world population, both factors play an enormous role in securing food supply.