- ISOBUS machine operation - GPS-Switch basic and GPS-Switch pro – automatic part-width section switching - GPS-Switch basic & GPS-Switch pro with AutoPoint – for the optimum switching times on the headland - GPS-Switch pro with TramlineControl – automatic detection and switching of the tramline for reducing driver stress - GPS-Switch pro – for creating a virtual headland - GPS-Maps&Doc – with integrated Task Controller for the automatic documentation of job related data - GPS-Maps&Doc – using application maps to optimise the seed rate and to better exploit the yield potential

- ISOBUS machine operation - GPS-Switch basic and GPS-Switch pro – for the automated headland and part-width section control of the fertiliser spreader - DynamicSpread (with GPS-Switch pro) for the dynamic part-width section switching with up to 128 part-width sections - GPS-Maps&Doc – with integrated Task Controller for the automatic documentation of job related data - GPS-Maps&Doc – part-area, site specific application of the efficient use of operating resources - GPS-Track – parallel driving aid for relieving stress on the driver - ArgusTwin – for the automatic adjustment of lateral distribution pattern - WindControl (in accordance with Prof. Dr. Karl Wild, HTW Dresden) - compensation of wind influence at varying wind conditions - FlowCheck – for monitoring the outlet apertures - Online-N sensor technology for part-area, site specific fertilisation to assist the appropriate crop nutrition

Via the AmaPilot+ multi-function joystick, actuation if especially comfortable. All functions in the operation menu can be actuated via the AmaPilot+ or any other ISOBUS multi-function joysticks.

The AmaTron 4 ISOBUS terminal, which was developed in-house by AMAZONE, means that comfortable working becomes a matter of course. The 8” low-reflection multi-touch colour display allows easy reading and quick input of all the necessary information. Intuitive operation of the functions is guaranteed at all times either via the 12 keys or buttons in the touch display. Quick navigation between the relevant applications is also possible via one of the three one-touch keys.

1. ISB key (ISOBUS-Shortcut-Button) allows the deactivation of all active ISOBUS implement functions

2. 8" multi-touch colour display provides good readability under all ambient light conditions

3. Three one-touch keys allow a quick changeover between the menus (home button, map view and machine operation).

4. 12 soft keys and 12 touch buttons: From choice, all operations can be carried out via the touch display or directly via one of the 12 soft keys. The backlit soft keys provide reliable and comfortable operation, especially on rough ground.

5. Connection ports

• Connection for GPS signal
• CANBUS connection
• TECU connection for speed sensor signals
• Camera connectivity
• Optional hotspot via USB
• Two USB 2.0 interfaces
• Loudspeaker

6. Light sensor: Automatic changeover over between day and night modes and the matching of the display brightness to the ambient light conditions.

7. Proximity sensor: By approaching the terminal, the 12 touch buttons are automatically displayed.

8. On/off button

Your comfortable and reliable assistant
The AmaTron 4 operator terminal has been developed with the intention of fulfilling the highest demands in terms of comfort and maximum stress-relief for the driver. A finger swipe enables the operator to navigate intuitively through the clearly and simply structured operational menu. A freely configurable status bar along the top of the screen displays the chosen parameters and information tabs at any time, no matter which menu or sub-menu you are in.
Thanks to the quick start menu, changes to individual settings can also be made in a matter of seconds and any job data imported or exported.

From choice, the AmaTron 4 can be operated via its 12 soft keys or through the 12 switch areas. Practically, the switch areas automatically appear on the right hand side of the screen as soon as the proximity sensor detects your hand approaching. In the map view, the machine can be operated via the switch areas or via the soft keys.

The status bar along the top of the screen is visible in all levels and can be fully configured according to one’s own ideas. Just determine for yourself which parameters and settings are important to you and then enter them in the status bar.

To meet all demands, AMAZONE offers various fee-based software licences for AmaTron 4. The applications GPS-Switch basic and GPS-Switch pro, GPS-Maps&Doc, GPS-Track, and AmaCam are already preinstalled so that no additional software is necessary. They can be used initially free of charge for 50 hours and only then does one have to decide whether permanent activation is required.

Thanks to the light sensor which is integrated as standard, the AmaTron 4 constantly matches its display illumination to the ambient light conditions. So an unfavourable display brightness, for instance during twilight, is a thing of the past. The automatic switching over between a day and night mode eases additionally the overall handling.

Data transfer is via the standardised ISO-XML and Shape file formats for simple communication with most available farm software packages

In the MiniView, the most important machine information is clearly shown along the bottom of the screen - even in the map view. If necessary, the MiniView can appear or hide to optimally utilise the full area of the 8“ multi-touch colour display. Via the automatic zoom at the headland, an even better control of the actual position is possible. As an alternative, the map view can be manually enlarged or minimised.

Simple and quick navigation
With the aid of the App carousel, any changes between individual applications can be comfortably accomplished. One quite simply leafs through the main operational pages at a swipe. AmaTron 4 allows the creation and use of not just several ISOBUS machines but also non-ISOBUS compatible machines. The implement management overview clearly shows which active tractors and mounted implements are currently connected.

Touch button or soft key

From choice, the AmaTron 4 can be operated via its 12 keys or its 12 buttons. For convenience, the buttons automatically appear on the right-hand side of the screen as soon as the proximity sensor detects your hand approaching. In the map view, the machine can be operated via the touch buttons or via the soft keys.

1. Automatic display of the buttons on the right-hand side of the screen via the proximity sensor
2. Automatic hiding of the buttons for optimum utilisation of the entire display area

MiniView – everything at a glance
The most important machine information is clearly shown at the bottom of the screen in the MiniView display, even when in the map view. The MiniView display can be faded in or faded out as required, in order to optimally utilise the full area of the 8" multi-touch colour display.

1. Machine operation in map view
2. The MiniView display with all important parameters can be faded in or faded out with a simple tap

Customise it for yourself!
The status bar along the top of the screen is visible in all levels and can be fully configured according to one’s own ideas. Just determine for yourself which parameters and settings are important to you and then drag them into the status bar.

1. Various information, such as the time, GPS status or light bar, can be placed in the status bar.

Up and ready by day or night
Thanks to the light sensor which is integrated as standard, the AmaTron 4 constantly matches its display illumination to the ambient light conditions. So an unfavourable display brightness, for instance during twilight, is a thing of the past. Automatic changeover over between day and night mode also facilitates that easy handling.

Quick start menu
Thanks to the quick start menu, job data can be quickly and simply imported and exported (as an ISO-XML or pdf file). Help windows with hints and tips on the use and configuration of the terminal can also be accessed. In addition, practical-related settings, such as AUX-N layout, the brightness or the volume level, can be changed within seconds.

1. The quick start menu enables changes to be made to individual settings within seconds.
2. Quick import and export of job data.

- ISOBUS machine operation - GPS-Switch basic and GPS-Switch pro – automatic part-width section switching for high precision, even more comfort and the maximum safety with saving potentials of up to 5 % (of crop protection agent) - GPS-Switch pro – exact switching of 50 cm part-width sections and automatic boom lowering for application start - GPS-Maps&Doc – with integrated Task Controller for the automatic documentation of job-related data - GPS-Maps&Doc – part-area, site specific application for the efficient utilisation of operating resources - GPS-Track – parallel driving aid for reducing driver stress

The AmaTron4 operator terminal has been developed with the intention of fulfilling the highest demands in terms of comfort and with maximum stress-relief for the driver. A finger swipe enables the operator to navigate intuitively through the clearly and simply structured operational menu. A freely-configurable status bar along the top of the screen displays the chosen parameters and information tabs all the time, no matter which menu or sub menu one is in. Thanks to the quick start menu, also changes to the most important settings are made within seconds and any job data can be imported or exported. In addition, a practical mini-view display helps always to have in sight the most important machine settings, exactly there where it matters.

Thanks to the quick start menu, job data can be quickly and simply imported and exported. Also, for a quick diagnosis, data can be accessed and exported via the diagnosis function. In addition, practical, relevant settings, such as AUX-N layout, the brightness or the volume level, can be changed within seconds. Furthermore, the software version is directly visible within the menu. In particular, the new operating concept for the documentation and job management has been completely reorganised and now supports a practical-oriented way of working. The AmaTron 4 enables, for instance, the operator to immediately start work without having to start a job. Just decide later whether, and how, you would like to make use of that data. The special highlight is that the data and information relating to any application is stored, and can be found at any time clearly and at a glance assigned to the field. Various information, such as time, GPS status or parallel driving display can be located in the status bar.

- Part-area, site specific application of fertiliser and/or seed in just one operational pass - GPS-Maps&Doc – with integrated Task Controller for the automatic documentation of job-related data - GPS-Track – parallel driving aid for reducing driver stress

With the GPS-Switch pro version, based on GPS-Switch basic, now up to 128 part-width sections are possible. Furthermore, with the GPS-Switch pro version, additional applications are possible, such as, for example, automatic boom lowering with Amazone crop protection sprayers or the intelligent tramlining switching, which, after having created the first AB line, can already calculate all further tramlines. There is also the possibility to establish a virtual headland, log any obstacles and add a point of interest (POI).