Extension to the existing product range

UX5200special_JohnDeere_d0_kw_P5316889_d1_190814_p50
UX5200 Special

The successful UX Special model range, in tank capacities of 3,200 l or 4,200 l, are now joined by an additional size with a tank capacity of 5,200 l. The standard equipment of the UX 5200 Special includes a high-performance 380 l/min pump to ensure adequate agitation. The over-capacity 380 l/min pump is available across the complete UX Special range and extends the boom width potential of the Super-L2 booms for all UX Specials from its existing maximum of 30 m to 36 m. 

New designAt Agritechnica, the UX Special range will be presented in a new design. The design, with its grey elements in and around the area of the operator station, fresh water tank and the induction bowl, is based on the design of the UX Super.

High-capacity and reliable 380 l/min pumpThe UX 5200 Special has a single pump system with an output of 380 l/min. The pump is driven as standard via the wide-angle PTO shaft. During filling at its nominal speed, full pump capacity is available for filling the spray agent tank. The venturi can, at the same time, be used to draw liquid out of the induction bowl or increase the overall water filling rate to 500 l/min.

Induction bowl and venturiThe familiar and extremely effective induction bowl on the UX Special has a capacity of 55 l and ensures the safe induction of plant protection agents. Active ingredients, in powder or granulated form, are reliably dissolved in the induction bowl with its integrated rinse ring that includes an additional nozzle, and can be quickly and simultaneously inducted with the venturi. The induction bowl has a dust-proof seal and can be cleaned internally when closed using the canister rinse nozzle. The induction bowl has a rotating cleaning nozzle for easy cleaning of spray agent canisters and measuring jugs. These make it possible to make full use of sticky spray agents and to rinse the canisters very thoroughly.

SmartCenter – centralised operator station on the UX SpecialThe UX Special crop protection sprayers have a centralised and ergonomically-designed operator station, the SmartCenter. To prevent any mix-ups, all the operating controls are arranged logically on the front, left-hand side, directly next to the tractor cab door, All UX Specials also have, as standard, manual fill level indicators for both the spray agent tank and the flushing water tank in the SmartCenter. As an option, a digital display for the fill level of the spray agent tank can be specified for the operator station.

Comfort-Pack – for the in-cab control of the liquid systemThe optional Comfort-Pack on the UX Special controls the most important functions of the spray liquid system, such as the automatic fill stop, agitator control and automatic, remote-controlled cleaning via an ISOBUS terminal in the cab.

The automatic fill stop for the suction hose or when pressure filling from a bowser ensures that the operator has only the desired amount of spray agent in the tank. The hydraulic agitator in the spray agent tank is automatically switched off in proportion to the fill level, in order to prevent foaming of the plant protection agent and to make it easier to spray out any residual volumes. Sequentially-switched internal cleaning nozzles ensure the most effective washing out during the automated, remote-controlled cleaning cycle. Comfort-Pack automatically ensures that the agitator and the spray line are also flushed out.

From part-width section control to individual nozzle controlA broad range of part-width section control and individual nozzle control are available for the UX 5200 Special, as with the other product types of the UX Special. In its simplest version, the machine can be equipped with traditional part-width section valves offering up to 13 part-width sections. This can be complemented by the tried and tested DUS pressure re-circulation system. At the next level of specification, the Special can be equipped with AmaSwitch individual nozzle switching and the associated 50 cm part-width sections. The highest level of sophistication is provided by AmaSelect individual nozzle control.

Press review 2019

Cenio_3000_Special
Nov 28, 2019, Hasbergen-Gaste

Cenio – the new lightweight and versatile mounted cultivator

With the Cenio, Amazone launched a new 3-row compact mounted cultivator at this year’s Agritechnica 2019. Designed as a lightweight but extremely flexible mulch cultivator, the Cenio rounds off the bottom end of the Amazone cultivator range of 3-point linkage mounted cultivators as the "little brother" of the Cenius.

Amazone Saetechnik damals_heute
Nov 20, 2019, Hasbergen-Gaste

250,000 Amazone seed drills sold

Having sold 250,000 seed drills, Amazone certainly has special cause for cele-bration. Not only is the quarter of a million sales that have been notched up an impressive feat; but we can look back on a long history of successful seed drill developments.The origin of the seed drill’s history stretches back to 1947, when Dipl. Eng. Heinrich Dreyer worked together with Mr Kademann to develop the first D1 seed drill that had a working width of 2 m and which was equipped with...

Amazone_AmaSelect Row
Oct 24, 2019

Three Agritechnica silver medals for Amazone

The first successes for Amazone on the run-up to Agritechnica 2019. The neutral panels of experts appointed by the DLG (German Agricultural Association) has awarded silver medals to three of Amazone’s innovations.

RoTeC-Schar Teaser
Oct 5, 2019

Amazone RoTeC coulters – in use more than 1.5 million over

An Amazone innovation enjoys a very special anniversary with 1.5 million RoTeC single disc coulters now in use. And, at the standard row spacings of between 12.5 cm and 16.6 cm, this would correspond to a total working width of over 200 kilometres! The RoTeC coulter shows its strengths particularly under difficult mulch sowing conditions – when, for example, dealing with large quantities of crop residues and on damp, heavy and sticky soils.
Further notable advantages:...

Amazone_Cirrus mit Minimum TillDisc (1)
Mar 26, 2019

Cirrus with Minimum TillDisc

Cirrus with Minimum TillDisc The new set-up for changing arable farming concepts. With the Minimum TillDisc corrugated disc segment, the Cirrus gets a new special option in place of the cultivation discs.

AmazoneAmatron4 (1)
Mar 18, 2019

Amazone gets iF Design Award 2019 for AmaTron 4

A further design success for Amazone: the Amazone AmaTron 4 ISOBUS terminal has been awarded the coveted iF Design Award 2019. The intuitive handling and the unique, tablet style design of the terminal were picked out as being of an exemplary design in the industry.

The jury tested, in part, the new interface for itself and, included in its evaluation, the impression gained of the high degree of ergonomics. The terminal is a complete in-house development from Amazone.

Amazone_UF1602_022019
Mar 9, 2019

New UF 1602 mounted sprayer

New UF 1602 mounted sprayer
AMAZONE now broadens its range of UF 02 mounted sprayers with the new, ISOBUS compatible, UF 1602 with a nominal volume of 1,600 l and an actual volume of 1,700 l. The UF 1602 can be equipped with all Super-S2 booms from 15 m to 30 m.
The UF 1602 features a specifically shaped, polyurethane tank with a favourable centre of gravity. The very smooth tank walls allow the effective interior and exterior cleaning of the tank.

The operation of...

Catros Special mit Crushboard
Feb 12, 2019

Front mounted frame with Crushboard or tractor wheel mark eradicators for Catros Special or CatrosXL

Front mounted frame with Crushboard or tractor wheel mark eradicators for Catros Special or CatrosXL

For the Catros Special and CatrosXL compact disc harrows in working widths of 3 m, 3.50 m and 4.00 m, AMAZONE now optionally offers a front mounted frame with Crushboard. This option makes these compact disc harrows ideally suited to seedbed preparation as the Crushboard achieves a strong crumbling and levelling effect. However, also during stubble cultivation, this...

Feb 6, 2019

SIMA 2019 - the agrirouter is online

Manufacturer-independent data exchange is reality
Osnabrück / Paris, 06 February 2019
The web-based data exchange platform "agrirouter" enables data exchange between machines, agricultural software products from different manufacturers and suppliers. For farmers and contractors with mixed machinery this has not been possible so far.
The developers of the agrirouter, the German DKE-Data GmbH & Co KG based in Osna-brück, Lower Saxony, announced the official launch...