ZG-B bulk fertiliser spreaders

• Rigid and robust chassis technology, designed for speeds of up to 50 km/h
• Over-size tyres reduce ground contact pressure and enable the spreader to be used in even the harshest of conditions
• 7.0 to 9.8 t payload 
• Track widths of 1.50 to 2.25 m are possible for tyres with an AS profile 
• Increased driving comfort due to spring-suspended and height-adjustable drawbar systems 
• Increased safety in road traffic due to large-dimensioned axles and brakes (Twin-circuit air braking system
• or hydraulic braking system) 
• High ground clearance

• Easy to fill from the store or using a loader thanks to large filling opening
• Steep hopper walls ensure a consistent flow of spreading material even on sloping terrain
• Low-wear rubber floor belt with automatic floor belt control

• Mechanical spreading disc drive
• Floor belt drive via PTO shaft
• Hopper volume 5,500 / 8,200 l
• Working widths 10 – 36 m

• Mechanical spreading disc drive
• Belt floor drive via ground wheel (forward speed-related application rate regulation)
• Hopper volume 5,500 / 8,200 l
• Working widths 10 – 36 m

• The ZG-B Super features forward-speed related rate control via ground wheel drive. The ground wheel drive ensures that the spread rate remains constant even at different forward speeds.
• Via the gearbox (ZG-B Special / ZG-B Super) there is a choice between two floor belt speeds for metering either large or small application rates.

The robust ZG-B Special and ZG-B Super bulk fertiliser spreaders are top of the class when it comes to costeffective fertilising. They are equipped with a strong universal lime spreading unit for working widths of up to 15 metres. This enables even large quantities to be evenly and accurately distributed.

In addition, the ZG-B Special and ZG-B Super bulk material spreaders can also be equipped with the OM spreading discs allowing the spreading of mineral fertiliser at working widths of up to 36 m. The exchange of the spreading discs is simply and quickly done.

1. Stainless steel rate sluice gate for setting the spread rate with an easily readable scale directly in the operator‘s field of vision, and easily adjustable.
   Option: hydraulic operation and half-side shut-off with the double shutter slide system.
2. The rugged universal twin-disc spreading unit with oil-bath gearbox and overload safety for direct driving of the spreading discs ensures an even distribution, even with very high spread rates. Also available as an option:
   OM spreading discs for the application of granular mineral fertilizer.

More efficiency and flexibility

The ZG-TS Truck demount spreader is the ideal solution for contractors and farms that need to quickly travel large distances between the field and yard. In addition, the spreaders can be used on a carrier vehicles with larger ground clearances and track widths, so that the range of application is increased. The work rates can also be considerably increased with a self-propelled machine. Since the ZG-TS Truck is also supplied as a mounted spreader with the intelligent ProfisPro, WindControl and ArgusTwin systems, it also sets new standards in the self-propelled machine segment as far as precision is concerned.

Advantages of the ZG-TS Truck

• Better manoeuvrability in the yard and in the field  
• More efficiency on the road thanks to higher transport speeds 
• Benefits of the carrying vehicle, such as, larger ground clearance and track widths 
• Optimum centre of gravity by emptying from back to front

The all-rounder for successful seamless spreading

The ZG-B drive is a real all-rounder. It can be used equally for spreading both earth moist lime and granulated mineral fertiliser for base fertilisation. The ZG-B drive ensures reliable and precise work under all conditions. AmaTron 3 and the optional weighing system for the ZG-B Drive are of special benefit to agricultural contractors.

With this level of equipment, the actual applied spread rate can be determined and adjusted on the move if necessary. This guarantees a consistent application rate and is the best way to ensure an even nutrient distribution. A further plus: the weighing system is utilised by the automatic plot related documentation (ASD).

• Mechanical spreading disc drive
• Electro-hydraulic drive of the floor belt (forward speed-related application rate regulation)
• Part-area, site specific spreading via application maps
• Hopper volume 5,500 / 8,200 l
• Working widths 10 – 36 m