Electronics | Terminals | Software

Citan12001-C_d0_kw_3749_d1_170109_p50_kl_rdax_170x121.jpg

All under control – seed pipe monitoring

Another useful system to assist the driver is the optionally available seed pipe monitoring which detects immediately any blockages down at the coulter and in the tube. Sitting directly behind the distributor head, sensors monitor the seed flow in the seed pipes. Incorrect switch-over of the tramline rhythm is automatically detected by the system

Further information + Less information -
Cayena_22016-10-12.jpg

Forward speed source

For the regulation and drive of the metering unit, the forward speed can be registered via a radar sensor or via a GPS speed sensor signal. As an alternative, the tractor speed can also serve as a speed source via a signal cable.

Further information + Less information -
AmaTron_4_Poster-Composing_d0_20180515 (1)

From simple to high-tech – everything is possible

With the ISOBUS-compatible AmaTron 4 and the AmaPad 2, AMAZONE offers two extremely convenient operator terminals for your ISOBUS machinery. In addition to just machine operation, there are other possible applications, such as GPS-Switch (automatic part-width section control).

  • All applications are pre-installed and can be tried out initially free of charge
  • Intuitive and clear operation
Further information + Less information -
Cirrus_akt_201702_14.jpg

The benefits of ISOBUS

+ AMAZONE ISOBUS machines are UT 2.0 certified and thus can be operated with any ISOBUS terminal with UT 2.0. + All AMAZONE ISOBUS terminals and machine job computers comply with the AUX-N standard and can assign the soft key coverage to an AUX-N compatible multi-function joystick. + AMAZONE ISOBUS machines can be actuated via any ISOBUS compatible Section Control licence. + Special features of AMAZONE ISOBUS machinery: + Up to three user profiles and individual user interfaces can be set up for different drivers. + The operator menu can be optimally matched with ISOBUS terminals that have differing numbers of soft keys. + Each machine function can be freely allocated in the menu layout. + Complete documentation via Task Controller (ISO-XML). As an alternative to documentation via Task Controller, a simple job record of total values (worked area, required time, applied rate) is possible. The recorded total values can then be exported as a screenshot to an USB stick.

Further information + Less information -
Cirrus_11_2015_17.jpg

AMAPAD - an especially comfortable method of controlling agricultural machinery

With the AMAPAD operator terminal, AMAZONE offers an entirely new and high-class solution for GPS application such as automated GPS based part-width section control and Precision Farming applications. AMAPAD features a large, especially ergonomic, 12.1" touch screen. With the unique “MiniView” concept, applications that do not need to be actuated but which, however, need to be monitored, are clearly shown at the side. If needs be, these can be enlarged by “fingertip” widening. The possibility also exists to customise the display, a feature which rounds off the exceptional layout of this operator terminal. In addition to GPS-Switch pro part-width section control, a high-quality professional manual light bar guidance system is also installed as standard. GPS-Track pro can also be upgraded to an automated steering system.  

The terminal includes the following functions:

  • ISOBUS implement operation
  • Job management for documentation
  • Automated GPS-Switch pro part width section control
  • Integrated light bar for GPS Track pro parallel guidance system
  • As an option: upgradable to automatic steering
  • GPS Maps pro application map module
  • RS232 Interface via SCU adapter (for data exchange)
  • Two USB ports for data exchange
  • WLAN module (via USB adapter)
  • GPS output

    The characteristics of AMAPAD:
  • Screen made from toughened glass
  • Housing made from impact proof plastic
  • Extra narrow rim for maximum visibility
  • Flush finish, no penetration of dust/humidity
Further information + Less information -
AMALOGplus_001_d1_121213_p50_kl_2_rdax_170x296.jpg

AMALOG+ or AMATRON 3 operator terminals

The AMALOG+ carries out the setting up and monitoring of the tramline rhythm, hectares sown, fill level and the track marker position. The AMATRON 3 operator terminal takes over the extended control of the important functions (only for Citan 8000 to 9000). This includes operational functions as well as adjustments on the machine, such as, for example, automatic calibration and seed rate adjustment up or down on the move. The AMATRON 3 is a machine-overlapping operator terminal for seed drills, fertiliser spreaders and crop protection sprayers that ensures an optimal rate control and operation. Both operator terminals additionally control and monitor the track marker functions and so makes for a meaningful solution when avoiding wet holes and obstacles.

Further information + Less information -
CCI100_Cirrus_d1_150820_p50_kl_rdax_170x159.jpg

CCI 100 operator terminal - The universal terminal

The CCI ISOBUS terminal from AMAZONE is the result of the cooperation with several other manufacturers of agricultural machinery who are joint participants in the Competence Centre ISOBUS e.V (CCI). With CCI, AMAZONE and its partners have laid the foundation to introduce ISOBUS into practice. The CCI is the basis to convert all AMAZONE machinery and implements successively to the ISOBUS standard.  

  • The bright 8.4" colour display with its high screen resolution and ambient light sensor matches the brightness automatically to the light conditions. This avoids the driver in twilight or at night being blinded by too bright a display.
  • The Input is carried out from choice via the operator-friendly touch screen or via the soft keys.
  • Fatigue-free operation at night is assisted by the back-lighting of the keys which are also connected with the light sensor.
  • The proven AMAZONE one-handed operation is still possible because the functional layout of the soft key area can be simply mirrored.
  • For intuitive menu guidance and the convenient input of values and text, the terminal is provided with a high-quality touch display.
  • For the direct, quick adjustment and readjustment of pre-set values, a scroll wheel with operating functions has been ergonomically integrated into the housing..  

The terminal includes the following functions:  

  • ISOBUS implement operation
  • Tractor ECU function (Interface for speed, PTO shaft and lower link position job Management for documentation)
  • CCI.Control job management for documentation
  • CCI.Command (optional):  
    Automatic part width section shut-off CCI.Command.SC    
    Parallel guidance aid CCI.Command.PT
  • Application maps supported in ISO-XML Format
  • USB interface for data exchange
  • Interface for the connection of a GSM modem
  • ASD- and LH5000 interfaces via RS232 (nominal value transfer), e.g. for N-sensors
  • Camera function CCI.Cam
  • In conjunction with seed drills, the CCI terminal features the automatic tramline function. Here the tramline position is controlled via GPS with the aid of the parallel driving module of the CCI terminal.
Further information + Less information -
Cirrus_akt_201702_15.jpg

Further ISOBUS terminals

Important information Please note that when working with other ISOBUS terminals, additional section control software, for example, from the tractor manufacturer, is normally necessary. This is not usually included in the Standard version of other ISOBUS terminals. 2-terminal solution A twin-terminal solution with the simultaneous use of a tractor ISOBUS terminal and AMATRON 3 or CCI 100 is recommended if the tractor terminal does not support the Section Control function or if you intend to  use the Cirrus drill via AMATRON 3 or CCI 100 and a separate screen.

Further information + Less information -
AmaPilot_d2_150130_rdax_170x208.jpg

AmaPilot+ multi-function joystick

The AmaPilot multi-function joystick makes operation even more convenient. All the functions in the operating menu can be actuated via AmaPilot or other ISOBUS joysticks (AUX-N).

Further information + Less information -
Cayena_22016-10-19.jpg

Comfort Pack 1 with TwinTerminal 3.0

To further simplify the pre-metering, calibration and residue emptying, AMAZONE offers for the Cayena, in conjunction with AMATRON 3, CCI 100 or AMAPAD operator terminals, Comfort Pack 1 with TwinTerminal 3.0. The TwinTerminal is mounted directly on the seed drill near to the metering units. This position offers a decisive benefit: Now, the operator can input the data for the calibration and then carry out the calibration procedure directly on the machine avoiding any unnecessary, repeated climbing up and down from the tractor. The TwinTerminal 3.0 consists of a water and dustproof housing with a 3.2” display and 4 large operational keys.

Further information + Less information -

Related links

Here you will find further information on seeding technology

Are you interested?

Provide us your contact details* and we will get back to you:
* Your contact details will only be used to contact you as requested.