Basic machine | Frame | Hopper

ZG-B_8200-Super_Claas_001_d2_140814_rdax_170x141.jpg

Running gear – high levels of comfort for maximum work rates

  • Well-engineered and robust running gear designed for speeds up to 50 km/h
  • Over-size tyres reduce ground contact pressure and enable the spreader to be used in even the harshest of conditions
  • 7.0 to 9.8 t payload
  • Track widths of 1.50 to 2.25 m are possible for tyres with an AS profile
  • Increased driving comfort due to spring-suspended and height-adjustable drawbar systems
  • Increased safety in road traffic due to large-dimensioned axles and brakes (Twin-circuit air braking system or hydraulic braking system)
  • High ground clearance
More information + Less information -

Large-capacity hopper – saves travelling and loading time

  • Easy to fill from the store or using a loader thanks to large filling opening
  • Steep hopper walls ensure a consistent flow of spreading material even on sloping terrain
  • Low-wear rubber floor belt with automatic floor belt control
More information + Less information -
ZG-B_0005_rdax_170x128.jpg

ZG-B Special

  • Mechanical spreading disc drive
  • Floor belt drive via PTO shaft
  • Hopper volume 5,500 / 8,200 l
  • Working widths 10 – 36 m
More information + Less information -
ZG-B_0006_rdax_170x135.jpg

ZG-B Super

  • Mechanical spreading disc drive
  • Belt floor drive via ground wheel (forward speed-related application rate regulation)
  • Hopper volume 5,500 / 8,200 l
  • Working widths 10 – 36 m
More information + Less information -
ZG-B 6

Spread rate control and gearbox

  • The ZG-B Super features forward-speed related rate control via ground wheel drive. The ground wheel drive ensures that the spread rate remains constant even at different forward speeds.
  • Via the gearbox (ZG-B Special / ZG-B Super) there is a choice between two floor belt speeds for metering either large or small application rates.
More information + Less information -

Robust and reliable

The robust ZG-B Special and ZG-B Super bulk fertiliser spreaders are top of the class when it comes to costeffective fertilising. They are equipped with a strong universal lime spreading unit for working widths of up to 15 metres. This enables even large quantities to be evenly and accurately distributed.

More information + Less information -
Vielseitig einsetzbar (1) ZG-B_0011

Versatile application

In addition, the ZG-B Special and ZG-B Super bulk material spreaders can also be equipped with the OM spreading discs allowing the spreading of mineral fertiliser at working widths of up to 36 m. The exchange of the spreading discs is simply and quickly done.


  1. Stainless steel rate sluice gate for setting the spread rate with an easily readable scale directly in the operator‘s field of vision, and easily adjustable.
    Option: hydraulic operation and half-side shut-off with the double shutter slide system.
  2. The rugged universal twin-disc spreading unit with oil-bath gearbox and overload safety for direct driving of the spreading discs ensures an even distribution, even with very high spread rates. Also available as an option:
    OM spreading discs for the application of granular mineral fertilizer.
More information + Less information -
ZG-B_0012_d2_110929_rdax_170x124.jpg

ZG-B Drive

The all-rounder for successful seamless spreading

The ZG-B drive is a real all-rounder. It can be used equally for spreading both earth moist lime and granulated mineral fertiliser for base fertilisation. The ZG-B drive ensures reliable and precise work under all conditions. AmaTron 3 and the optional weighing system for the ZG-B Drive are of special benefit to agricultural contractors.

With this level of equipment, the actual applied spread rate can be determined and adjusted on the move if necessary. This guarantees a consistent application rate and is the best way to ensure an even nutrient distribution. A further plus: the weighing system is utilised by the automatic plot related documentation (ASD).


  • Mechanical spreading disc drive
  • Electro-hydraulic drive of the floor belt (forward speed-related application rate regulation)
  • Part-area, site specific spreading via application maps
  • Hopper volume 5,500 / 8,200 l
  • Working widths 10 – 36 m
More information + Less information -
ZG-B_0013(1)_rdax_170x247.jpg

Benefits of the ZG-B Drive

  • Low wheel slip for exact speed recording via wheel sensor
  • Simple and freely selectable metering of the spread rate via the shutter slide
  • Comfortable operation and control via AmaTron 3
  • Forward speed-related spread rate regulation via electrohydraulically controlled rubber floor belt
  • Universal twin-disc spreading unit with lime spreading discs
  • Optional: Limiter border spreading device
  • Standard half-side shut off reduces over-fertilisation when base fertilising
  • Simple emptying of residues when stationary using hydraulic belt floor drive
  • Optional weighing system
More information + Less information -

ZG-TS Truck & ZG-B Truck – High efficiency between yard and field

More efficiency thanks to high transport speeds

ZG-TS Truck & ZG-B Truck (1) ZG-TS_Aufbaustreuer_7501_links_d2_181210
Optimum weight distribution due to the hopper inclined forward

The ZG-TS and ZG-B trailed spreaders are the ideal solution for contractors and farms which have to travel large distances between field and yard. By utilising the ZG-TS and the ZG-B on a carrying vehicle even large transport distances can be managed, significantly quicker and with less fuel consumption. In addition, the spreaders on carrying vehicles can be used with larger ground clearances and track widths so that the range of application is increased. As with the standard ZG-TS, truck mounted spreaders are delivered with the ProfisPro on-line weighing system, it sets new standards in this area of application. 


Advantages of the ZG-TS Truck / ZG-B Truck

  • Better manoeuvrability in the yard and in the field
  • More efficiency on the road thanks to higher transport speeds
  • Benefits of the carrying vehicle, such as, larger ground clearance and track widths



More information + Less information -

WindControl - Calm conditions at the touch of a button

The effect of the wind on the spread pattern can be permanently monitored and automatically compensated for by WindControl. A high-frequency wind sensor mounted on the machine records both the wind speed and the wind direction and transmits this information to the job computer.

Precision in mineral fertiliser application

Amazone offers ever more efficient and precise machines and processes, so that the agricultural sector can retain its competitiveness and future viability and operate more sustainably at the same time.

Calculate that extra profit: With the AMAZONE Border Spreading Calculator

With the AutoTS system, an average yield increase of approximately 17 percent compared with conventional systems can be obtained in the field boundary area.

Calculate the benefit yourself!

SmartLearning - EasyCheck

Precise spreading made easy – a digital, mobile test kit for the easy optimisation of the lateral distribution. Instead of using the test trays, as with the normal mobile test kit, the EasyCheck system consists of just 16 lightweight rubber mats and the EasyCheck App for smartphones.