Tines | Shares

Cenius_3003_Detail_001_d1_160323_p50_kl_rdax_170x265.jpg

C-Mix Special tines with shear bolt overload safety protection

For the rigid 3 m and folding 4 m Cenius

  • For operating conditions with infrequent overloading 
  • Protects the frame against excessively high forces 
  • Must be manually reset after triggering 
  • Trigger force 2,500 kg


More information + Less information -
C-Mix-Super-Zinken mit Druckfeder-Überlastsicherung (2) Zinken_C-MIX_SUPER_re_2_d1_220331

C-Mix Super tines with pressure spring overload protection

For every Cenius and Cenius-2TX

  • For operating in conditions with an occasional overload 
  • Protects the frame against excessively high forces 
  • Automatically resets after triggering – high force ensures a reliable reset 
  • Trigger force 600 kg for high operational reliability


  1. 600 kg at the point
  2. 30 cm

C-Mix-Super-Zinken mit Druckfeder-Überlastsicherung (1)


More information + Less information -
C-Mix-Scharsystem (1) Cenius_6003-2TX-Super_XTender_Claas_d0_kw_3265_d1_170928

C-Mix share system

The separation of guide plate from the share point above all serves to reduce wearing metal costs. Depending on soil type, location and soil moisture, 3 to 5 share points can be worn prior to exchanging the guide plate. The new guide plates on the C-Mix share system are manufactured with a spiral design that ensures, in combination with the optimum radius of the guide plate, the perfect deflection of the soil flow and thus a very high mixing intensity but yet with a lower power requirement. With the proven C-Mix share system AMAZONE offers a wide range of soil-engaging shares.

More information + Less information -
Für jedes Einsatzspektrum den richtigen Schartyp (1) Schare

The right type of share for every field of application

  1. C-Mix wing share 430 mm
  2. C-Mix wing share 350 mm*
  3. C-Mix duck foot share 320 mm*
  4. C-Mix point 100 mm with guide plate 100 mm
  5. C-Mix point 80 mm* with guide plate 80 mm
  6. C-Mix share 40 mm*

*also available in a HD variant

Für jedes Einsatzspektrum den richtigen Schartyp (2) Schare_1


More information + Less information -

Everything in the one hand

AMAZONE offers an extensive selection of different shares for the wide range of application of the Cenius. The various wing shares ensure excellent loosening together with a full-surface movement at a medium working depth. The narrower 80 mm and 100 mm shares optimally loosen the soil down to a working depth of 25 cm. The 40 mm wide C-Mix narrow share should be used for even deeper loosening down to 30 cm.

More information + Less information -

HD shares

The 350 mm wing share, the 320 mm duck foot share, the 80 mm point and the 40 mm share are also available as a hardwearing HD version especially for areas that have very abrasive operating conditions. During the entire lifespan, the length of the share is maintained. This means that no readjustment of the working depth is necessary. The service life is up to five times longer than in the standard system depending on the application and soil conditions.

More information + Less information -
Schnellwechselsystem C-Mix-Clip (1) C_Mix_Schnellwechselsystem_Schnitt_002_d1_161216

C-Mix Clip quick change system – Quick and easy share change for the cultivator tines

Quick, safe and cost-effective

With the C-Mix Clip quick change system, AMAZONE now also offers a system that enables a (virtually) tool-less, and above all, simpler, quicker and very comfortable share exchange. 

Like the well-known C-Mix shares, the C-Mix Clip system consists of a guide plate with a point. However, on the C-Mix Clip system, the guide plate is fixed to the tine and the point is attached to the quick change system. After the initial, simple fitting of the C-Mix Clip carrier onto the tine, different share points, specific to the relevant application, can be quickly fixed with the aid of an easily removable locking pin. The locking pin is guided at the back of the tine through a hollow screw and thus keeps the relevant share point safely on the C-Mix Clip carrier.

The separation of guide plate from the share point above all serves to reduce wearing metal costs. Depending on soil type, location and soil moisture, 3 to 5 share points can be worn prior to exchanging the guide plate. The new guide plates on the C-Mix share system are manufactured with a spiral design that ensures, in combination with the optimum radius of the guide plate, the perfect deflection of the soil flow and thus a very high mixing intensity but yet with a lower power requirement.

Depending on the application, AMAZONE offers three different share points. The 80 mm wide C-Mix Clip point,
the 100 mm wide C-Mix Clip point and a C-Mix Clip duck foot point which covers 320 mm. The 80 mm and 100 mm C-Mix Clip shares can also be used in conjunction with the 350 mm wing shares and thus give a complete overall soil movement when stubble tilling.


The benefits

  • Easy share change – reduced downtime 
  • Reduction in set-up time – reduced costs 
  • Share change in less than three minutes (on a 3 m working width)


Schnellwechselsystem C-Mix-Clip (4) C_Mix_Schnellwechselsystem_Detail1_78708802_01_gruen_d1_180927
C-Mix quick change system 

  1. Gap provides insurance against loss 
  2. Share fixing 
  3. Upper fixing screw (hollow) 
  4. Locking pin 
  5. Lower fixing screw
More information + Less information -
Die C-Mix-Clip-Scharspitzen (1) Scharspitzen

The C-Mix Clip share tips

  1. C-Mix Clip share tip 80 mm
  2. C-Mix Clip share tip 100 mm
  3. C-Mix Clip duck foot share tip 320 mm
More information + Less information -

Related links

Here you will find further information on cultivation

Are you interested?

Provide us your contact details* and we will get back to you:
* Your contact details will only be used to contact you as requested.