Part-width section control | Individual nozzle control

Elektrisch fernbediente TG-Armatur (1) UG_d2_kw_2375_170127

Electrically-controlled TG valve chest

The TG part-width valve chest with up to 13 part-width sections is available with ISOBUS control and AmaSpray+. The part-width boom sections are switched, on and off, quickly and drip-free via electric motor valves with pressure relief.

The amount applied is accurately and directly controlled by the computer in any situation. A unit with equal pressure compensation is not required with this system.

More information + Less information -

The DUS pressure recirculation system - proven more than 10,000 times

The AMAZONE DUS pressure recirculation system ensures a reliable circulation throughout the entire system. When starting the spraying operation, all the hoses including the spray lines are filled under pressure in the reverse direction with the mixed spray agent. This means the spray lines are always full and immediately ready to use over the entire working width. There is no waiting on the headland.

Every time individual part-width sections are shut off, during the turning operation and during transport, the spray liquid circulates continually thanks to the pressure recirculation system. This reliably prevents deposits, blockages or segregation in the spray lines.

During the cleaning operation, fresh water flushes the spray lines out right up to the nozzles without any spraying being necessary. During this cleaning procedure, the concentrated spray liquid is returned back to tank via the pressure recirculation system leaving the spray lines clean.

More information + Less information -

AmaSwitch

The simple solution for automatic 50 cm part-width section switching

With AmaSwitch, AMAZONE offers the precise solution for automatic part-width section control on 50 cm sections. AmaSwitch is the ideal alternative for users who want to maximise the benefits of very precise switching in wedge shaped fields and areas of overlap, thanks to the 50 cm part-width section control.

Standard equipment with AmaSwitch includes the DUS pro high pressure recirculation system and, in addition, can be equipped with LED individual nozzle lighting.

More information + Less information -
DUS pro (1) AmaSwitch_Schema_001_d0_20170105

Equipped with the DUS pro pressure recirculation system as standard

As in the case of DUS, the spray pressure in DUS pro is constant up to the individual nozzle and remains at the pre-set spray pressure. In addition, minimal residual spray volumes are achieved thanks to the conical spray lines. 


Conical spray line:
The diameter of the spray line varies along the boom

  • Minimum residual volumes
  • Even flow rate


  1. 15 mm
  2. 24 mm
  3. 24 mm
  4. 20 mm
  5. 16 mm
More information + Less information -

3-fold nozzle body, with electric on/off switching

The technology behind AmaSwitch is based on a conventional, manually-rotated, 3-fold nozzle body with electric individual on/off. The opening and closing is achieved via an electric valve which is fixed directly onto the nozzle body. In conjunction with GPS-Switch, it is thus possible to very precisely control 50 cm part-width sections in short work and on the headland. In addition to the automatic switching using 50 cm part-width sections, it is possible to configure the amount of part-width sections from choice.

More information + Less information -

4-fold nozzle body with electric on/off switching

In addition to the 3-fold nozzle body, AmaSwitch electric single nozzle control can also be equipped with a 4-fold nozzle body.


With true 25 cm nozzle spacing
The 4-fold nozzle body enables a perfect 25 cm nozzle spacing to be achieved with the aid of the optional extension kit. This offers the benefit, in combination with specific 80° nozzles, to reduce the boom to target surface distance down to less than 50 cm.

More information + Less information -
UX5200-Super_Amaselect_d0_kw_9966_rdax_170x88.jpg

AmaSelect

Electric individual nozzle switching with 50 cm part-width sections


4-fold nozzle body with automatic electric nozzle switching 
The electric AmaSelect individual nozzle control consists of a 4-fold nozzle body with electric on/off control plus the additional switching over of either a nozzle or a combination of nozzles. In addition to the 50 cm part-width sections, which can be switched automatically via GPS-Switch, the system offers electrical switching between the four mounted nozzles via the operator terminal or even completely automatically if the forward speed or application rate is changed. This offers the possibility, for instance when leaving the optimum pressure range of a nozzle, to switch on a second nozzle or to changeover to a larger nozzle.


  1. Motor housing
  2. Anti-drip diaphragm
  3. Power supply
  4. Nozzle body
  5. Spray line
More information + Less information -

With true 25 cm nozzle spacing

As an option, the AmaSelect nozzle body can also be equipped with an off-set kit giving 25 cm nozzle spacing. This offers the benefit, in combination with specific 80° nozzles, to reduce the boom to target surface distance down to less than 50 cm.

More information + Less information -

Automatic part-width section control GPS-Switch

If the terminal is equipped with Section Control functionality, i.e. GPS-Switch part-width section control by AMAZONE, the part-width sections can be switched completely automatically depending on the GPS position. Once a field has been created, the driver can concentrate fully on operating the vehicle in automatic mode, since the part-width sections are switched automatically in wedge shaped fields and on headlands.


Advantages of the automatic part-width section control:

  • Less strain on the driver
  • Increased precision, even at night or at higher speeds
  • Fewer overlaps and misses
  • Saving of resources
  • Less crop damage and reduced environmental impact

“With Section Control, the ISOBUS computer relieves the driver from a lot of work.”
(“dlz agrar magazine” – “Test report ZA-TS fertiliser spreader”· 02/2017)

Automatische Teilbreitenschaltung (2)
Automatische Teilbreitenschaltung (3) Teilbreitenschaltung_2

Up to 85 %* less overlap in comparison to conventional Section Control part-width section switching, e. g. on the headland

* Savings are dependent on field structure, boom width and the number of part-width sections







More information + Less information -