Optimum weight distribution


Front hopper and rear combination are mounted to the tractor in just a few minutes and without tools. The seed tubes are fitted down the side of the tractor via retainers that can remain there even when the Avant has been dismounted. By means of over-centre catches, the seed tubes to the font hopper and the rear combination are quickly connected. The front hopper is coupled onto the tractor’s front linkage and the hydraulic couplings are plugged into the tractor. The same procedure is carried out for the rear: The rotary cultivator is mounted onto the lower link arms, the top link arm connected and the hydraulic hoses are plugged in. That just leaves the data cable to be fitted to the AmaTron 3 and then the sowing operation can start.

WindControl - Calm conditions at the touch of a button

The effect of the wind on the spread pattern can be permanently monitored and automatically compensated for by WindControl. A high-frequency wind sensor mounted on the machine records both the wind speed and the wind direction and transmits this information to the job computer.

Image film AMAZONE 1883

We need your consent

This content is provided by an external server. By activating the content, personal data may be accessed and Cookies may be utilised.