AMAZONE - USA

Section control | Individual nozzle control

AmaTron_4_Poster-Composing_d0_20180515 (1)

From simple to high-tech – everything is possible

With the ISOBUS-compatible AmaTron 4 and the AmaPad 2, AMAZONE offers two extremely convenient operator terminals for your ISOBUS machinery. In addition to just machine operation, there are other possible applications, such as GPS-Switch (automatic part-width section control).

  • All applications are pre-installed and can be tried out initially free of charge
  • Intuitive and clear operation
More information + Less information -
AmaSelect_Spot_75cm_d1_190822 (1)

Precise switching in 50 cm part-width sections

The decisive benefit of the individual nozzle control is the possibility to operate with small part-width sections giving an even greater degree of precision in wedge shaped fields, short work and on the headland. If AmaSwitch or AmaSelect is combined with the automatic GPS-Switch Section Control, the automatic switching of individual nozzles in 50 cm part-width sections is made possible. With this system, areas of overlap are significantly reduced and are, in comparison with a conventional Section Control part-width section shut-off system, up to 85 % less. So, the combination of GPS-Switch and individual nozzle control results, depending on field shape and size, working width and number of part-width sections, in significant savings of spray agent compared with a normal spraying system used thus far.

More information + Less information -
7-fach-Teilbreitenschaltung_24m-Gestaenge_5c_190213_Schraffur_staerker_1_rdax_170x95.jpg

Electric individual nozzle control with actual 50 cm part-width section control

Even today, many crop protection sprayers in the market feature a normal part-width section valve chest. Here the classic part-width section often is 3 to 5 m wide. If using part-width sections manually operated by the driver, specifying smaller part-width sections often does not make sense due to the inaccuracy of the switch points. Thanks to automatic part-width section switching via Section Control, today more precise switch points are achieved so that, by utilising even smaller part-width sections, valuable crop protection agents are saved. With AmaSwitch and AmaSelect, AMAZONE offers two very precise solutions for 50 cm part-width section control.

More information + Less information -
UX_0150(1)_rdax_170x118.jpg

Electrically-controlled TG valve chest

For either ISOBUS control or AmaSpray+, the TG part-width valve chest is available. The part-width boom sections are switched, on and off, quickly and drip-free via electric motor valves with pressure relief. In all situations the spray rate is exactly and quickly controlled directly via the computer and so negating the need for any mechanical equal pressure control.

More information + Less information -
DUS_rdax_170x263.jpg

The DUS pressure recirculation system – proven more than 10,000 times

The AMAZONE DUS ‘Druck-Umlauf-System’ pressure recirculation system ensures the reliable circulation of spray liquid across the entire system for all UX trailed sprayers.When starting the spraying operation all the hoses including the spray lines are filled under pressure in the reverse direction with the mixed spray agent. This means the spray lines are always full and immediately ready to use over the entire working width. There is no waiting on the headland. Every time individual part-width sections are shut off, during the turning operation and during transport, the spray liquid circulates continually thanks to the pressure recirculation system. This reliably prevents deposits, blockages or segregation in the spray lines. During the cleaning operation, fresh water flushes the spray lines out right up to the nozzles without any spraying being necessary. During this cleaning procedure the concentrated spray liquid is returned back to tank via the pressure recirculation system leaving the spray lines clean.

More information + Less information -
UX5200-Super_NewHolland_d0_kw_0387_d1_160713_Detail_rdax_170x95.jpg

AmaSwitch – Electric individual nozzle switching with 50 cm part-width sections

With AmaSwitch, AMAZONE offers the precise solution for automatic part-width section control on 50 cm sections. AmaSwitch is the ideal alternative for users who want to maximise the benefits of very precise switching in wedge shaped fields and areas of overlap, thanks to the 50 cm part-width section control. Standard equipment with AmaSwitch includes the DUS pro high pressure recirculation system and, in addition, can be equipped with LED individual nozzle lighting.

More information + Less information -
AmaSwitch_Schema_001_d0_20170105_rdax_170x53.jpg

DUS pro

In conjunction with the electric AmaSwitch and AmaSelect individual nozzle control, the UX features, as standard, DUS pro high pressure re-circulation, whereby the spray pressure down to the individual nozzle is kept constant and at the pre-adjusted spray pressure. Thanks to the conical spray lines, minimal residual spray volumes are achieved. Conical spray line: The dimensions of the spray line vary along the boom • Minimum residual volumes • Even flow speed

More information + Less information -
AmaSelect_Detail_IMG_6156_d1_150901_rdax_170x119.jpg

3-fold nozzle body, with electric on/off switching

The technology behind AmaSwitch is based on a conventional, manually-rotated, 3-fold nozzle body with electric individual on/off. The opening and closing is achieved via an electric valve which is fixed directly onto the nozzle body. In conjunction with GPS-Switch, it is thus possible to very precisely control 50 cm part-width sections in short work and on the headland. In addition to the automatic switching using 50 cm part-width sections, it is possible to configure the amount of part-width sections from choice.

More information + Less information -
Spritze_Detail_Duesenkoerper_d0_kw_PC132270_d1_190109_rdax_170x118.jpg

4-fold nozzle body, with the additional 25 cm nozzle spacing

In addition to the 3-fold nozzle body, the electric AmaSwitch individual nozzle switching can be also equipped with a 4-fold nozzle body. With the 4-fold nozzle body, all the benefits of the electric AmaSwitch individual nozzle switching are maintained as with the 3-fold nozzle body but, in addition, with the aid of the optional extension set, an actual 25 cm nozzle spacing can be utilised. This offers the benefit, in combination with specific 80° nozzles, to reduce the boom to target surface distance down to less than 50 cm.

More information + Less information -
UX5200-Super_Amaselect_d0_kw_9966_rdax_170x88.jpg

AmaSelect – Electric individual nozzle switching with 50 cm part-width sections

Modern application technology The electric AmaSelect individual nozzle control consists of a 4-fold nozzle body with electric on/off control plus the additional switching over of either a nozzle or a combination of nozzles. So, the system, in addition to the 50 cm boom part sections which can be switched automatically via GPS-Switch, offers a changeover electrically between the four fitted nozzles via the operator terminal or, when required, completely automatically. Via the input of the optimum pressure range of each individual nozzle within the 4-fold nozzle body, the system automatically switches the nozzles according to these specifications. This offers the possibility, for instance when leaving the optimum pressure range of a nozzle, to switch on a second nozzle or to changeover to a larger nozzle. It is possible, how-ever, to freely configure any number of part-width sections with also any number of nozzles. Just for farmers or agricultural contractors with different tramline systems, a simple matching of the nozzle switching with the relevant working width is possible. As standard, AmaSelect is equipped with DUS pro high pressure recirculation and LED individual nozzle lighting.

More information + Less information -

WindControl - Calm conditions at the touch of a button

The effect of the wind on the spread pattern can be permanently monitored and automatically compensated for by WindControl. A high-frequency wind sensor mounted on the machine records both the wind speed and the wind direction and transmits this information to the job computer.

Image film AMAZONE 1883


We need your consent

This content is provided by an external server. By activating the content, personal data may be accessed and Cookies may be utilised.