BOOKS AND MORE
BOOKS AND MORE

UX trailed field sprayer

Accessories

Hydraulic height adjustable jack for more comfort

Hydraulischer Stützfuß

A height adjustable jack is integrated in the frame and with its convenient optional hydraulic height adjustment eases coupling to the tractor. A manual mechanical retainer has been fitted as standard.

Trailer towing eyes

Anhängespritze UX, Anhängezugvorrichtung

The UX field sprayer can be equipped with a clevis trailer coupling which is TÜV certified to tow up to a maximum of 12 t at 50 km/h.

AutoTrail draw bar steering

UX Special,  AutoTrail-Deichsellenkung

For the UX 3200 and UX 4200, in working widths up to 28 m, there is the option of AutoTrail drawbar steering when working on level ground. Alternatively, for the steering drawbar, there is hydraulic
drawbar control that is usable, for instance, when turning in row crops. In the transport position 40 km/h on the road can be achieved non-steered.

 

Slope compensation for AutoTrail

Anhängespritze UX, Hangsteuerung für AutoTrail-Lenkung

As an option, AutoTrail steering can now also be equipped with a tilt sensor for fully automatic slope compensation. This functions with both axle steering and drawbar steering. As the steering angle, depending on severity of the terrain, has to be possibly adjusted, the intensity of the setting can be altered at any time via the joystick. One particular help offered by AutoTrail is that, in and around tight yards, the drawbar steering can also be released when the booms are folded in.   

DistanceControl with 2 or DistanceControl plus with 4 sensors

Anhängespritze UX, DistanceControl

For all booms, in combination with Profi-fold 1 or 2, the fully-automatic boom guidance system DistanceControl, with 2 or DistanceControl plus with 4 sensors, is available. In heavily differing crop heights, or in areas with partially lodged corn, it could be that the boom, when equipped with 2 sensors, dips into the crop. In this case equipping the boom with four sensors will prevent this. The sensors are electrically connected in parallel and so it is always the sensor that is closest to the target surface that is actuated.

Electric boundary nozzle switching

UX elektrische Randdüsen

Additional nozzle switching
In order to extend the normal working width, an asymmetrical nozzle can also be switched on. This is
particularly useful if the distances between tramlines are not precise enough.

End nozzle switching
If a one metre buffer zone around the edge of the field needs to remain unsprayed due to distance constraints, end nozzle switching can be used.

Boundary nozzle switching
For precision border spraying between two sensitive crops, the boundary nozzles can be used to make sure the spray pattern is accurately defined

Liquid fertilisation – mature solutions for high outputs

UX Schleppschlauchverband

The AMAZONE UX is especially suited for liquid fertilising: the use of high grade plastic material, a good paintwork and the virtually exclusive use of stainless steel ensures a long life even with liquid fertiliser operation.
In conjunction with the Super-S2 boom a separate drag hose unit is available. The self-contained aluminium profiles can be attached with a few hand clamps. Drag hoses offer a risk-free late top dressing with liquid fertiliser and stainless steel weights help keep the position of the drag hoses within the crop.
For coarse droplet distribution of liquid fertiliser, AMAZONE offers multi-hole nozzles (3 or 7 holes) or even FD sluice nozzles.
On request, the Super-L2 boom with TG valve chest can be equipped with a second spray line. The staggered nozzle bodies then allow the fitting of drag hoses at a spacing of 25 cm.

 

Underleaf spraying equipment

UX Unterblattspritzeinrichtung

In conjunction with the Super-S boom AMAZONE offers an elegant solution for the successful underleaf spraying in vegetable and maize. crops. The Dropleg system from Lechler, for instance, is a freeswinging, underleaf spraying device that works across the rows and is an example of an easy and robust solution that fulfils the most professional of demands.

 

LED individual nozzle lighting

Amazone LED-Einzeldüsenbeleuchtung

   

Professional work lighting is today the basis of a flexible, output-increasing solution to operating in twilight and at night.
Illumination of the spray fans ensures complete control of the nozzle function at just one glance.
LED individual nozzle lighting picks out each individual spray fan. An absolutely immediate assessment of their operation down to the very last nozzle on the boom can be made.   

LED work lights

LED-Arbeitsscheinwerfer

Boom lighting is provided by two LED work lights mounted in the centre of the boom and, from here, due to their wide-reaching illumination; prove to be a particularly effective execution. Two further LED work lights to give additional background lighting can be mounted up on the platform.   

Task Controller (job management)

Task Controller (TC) allows the data registration of the machine and the data exchange between machine and the farm management information system, using the standardised ISO-XML format. In this way, jobs can be comfortably imported into the terminal or the finished documentation can be exported after work. Both, the total values of the machine (TC.BAS) and also the location specific data (TC-GEO) can be saved. In addition to job management and to the documentation, Task-Controller can also be used to process application maps in an ISO-XML file format.

As standard, Task Controller is included in AmaTron 3 and in AmaPad. For AmaTron 4 it can be ordered via the “GPS-Maps&Doc” software pack.

• Creation or loading of jobs
• Processing jobs
• Documentation of the finished work
• Processing of application maps in an ISO-XML format

GPS-Maps – part-area, site specific application

GPS Maps

GPS-Maps enables uncomplicated part-area site specific management because this software module provides easy use of application maps in a shape file format. Here, either the required rate of the actual material to be spread or also the required active ingredient rate can be directly processed. This level of functionality is included with AmaPad as standard and can be added for AmaTron 3 and AmaTron 4 via the software packs “GPS-Maps” and “GPS-Maps&Doc”.

• GPS-Maps is an intuitive system to process application maps
• Automatic part-area site specific regulation of the application rate
• Optimum crop management via need-oriented application

GPS-Track – your parallel driving aid in the field

GPS Track

The GPS-Track parallel driving aid proves to be an enormous benefit when it comes to orientation in the field, especially also on grass or other areas without tramlines. It features several track modes, such as A-.B lines and Contour lines. The track lines are clearly numbered. Any deviation from the ideal line is plotted in the display by an integrated light bar. Thanks to the clear steering recommendations with exact tramline distances you always remain on track!

• With AmaPad, the GPS-Track function is already included as standard
• With AmaTron 4 and AmaPad, the light bar is, as standard, integrated already in the status bar

Everything from a single source!

Amazone Amapilot

Thanks to the AUX-N feature, you can operate multiple functions of the machine via AmaPilot+ or any other ISOBUS multi-function joystick.

The benefits of AmaPilot+:
• Perfect ergonomics
• Almost every function directly controlled via 3 levels
• Adjustable hand-rest
• Freely-programmable, individual key layout

GPS-Switch

With GPS-Switch, AMAZONE offers a GPS-based, fully automatic, part-width section control for all AMAZONE operator terminals and ISOBUS compatible fertiliser spreaders, crop protection sprayers or seed drills.

GPS-Switch for AmaTron 3
• Automatic part-width section control of up to 80 part-width sections

GPS-Switch basic for AmaTron 4
• Automatic part-width section control of up to 16 part-width sections

GPS-Switch pro for AmaTron 4 and AmaPad
• Automatic part-width section control of up to 128 part-width sections
• Creation of a virtual headland
• Creation of Point of Interests (POI)
• Automatic boom lowering on an AMAZONE crop protection sprayer
• With AmaPad, the GPS-Switch pro licence is already integrated as standard

AMACLICK

AmaClick

Special crops often require the on/off switching of individual part width sections in the centre of the boom. AMACLICK is an additional ergonomic control unit which can be operated both in conjunction with the Joystick AmaPlot but also solely with an ISOBUS terminal.

From simple to high-tech – everything is possible

With the ISOBUS compatible AmaTron 3, AmaTron 4 and AmaPad, AMAZONE offers three particularly comfortable operator terminals for its ISOBUS equipment. In addition to the pure machine operation, even more application possibilities are available, such as, for example, the automatic GPSSwitch (Section Control) part-width section control. To meet those requirements, licences are needed for the additional applications so that every terminal can be equipped individually.

• All applications come pre-installed and can be initially tested free of charge
• Intuitive and clear actuation

Everything in view with the 2-terminal solution

In addition to the possibility of utilising an AMAZONE ISOBUS machine via the tractor terminal, the possibility is available to separate the functionalities of the tractor and the mounted implement and to operate them via two terminals. The tractor terminal can continue to control the tractor or also display the GPS applications whereas the additional operator terminal in its UT display mode is fully utilised to monitor and control the machine.

AmaTron 3: One knows what one has!

Amatron 3

AmaTron 3 features 8 backlit function keys and a high-contrast and low-reflection display. Depending on the driving situation and personal taste you can choose between the UT display (Universal Terminal) for machine operation or GPS displays. Here, the very good price-performance ratio is convincing! So AmaTron 3 is the ideal terminal for all who intend to supplement their existing AMAZONE machine park with a new ISOBUS machine.

Benefits of AmaTron 3:
• Compact design, requires little space
• Low-priced entry-level model for the ISOBUS world
• AmaTron 3 is a full ISOBUS terminal and allows, in addition, to operate all AMAZONE machines with AMABUS (AmaTron+ machines)
• Several applications can be actuated at the same time. Via the “Toggle-Button” the operator can toggle easily between the operational screens.

Terminal features
• ISOBUS compatible with all ISOBUS machinery from AMAZONE and other manufacturers
• AMABUS implement operation
• Tractor ECU function for retrofit to a non-ISOBUS tractor (power, speed, PTO speed, GPS geometry…)
• USB interface for data exchange
• ASD interface, e.g. for an N-sensor
• GPS interface

The following applications are possible:
• Task Controller – job management in ISO-XML format
• GPS-Maps (optional) – processing of application maps in shape file format
• GPS-Track (optional) – parallel steering aid with optional external light bar
• GPS-Switch (optional) – automatic part-width section control for up to 80 part width sections

External light bar

Amazone Externe Lightbar für Parallelfahrhilfe GPS-Track

Als a possible extension for the GPS-Track parallel steering aid, an external light bar is available for AmaTron 3 which can be readily coupled with GPS-Track. The external light bar can be freely positioned in the tractor cab.

AmaTron 4 – Manager 4 all

AmaTron 4

AmaTron 4, with its 8" multi-touch colour display, fulfils the highest demands of any end user. No matter whether via the cleverly designed operator elements (touch / 12 backlit keys / 3 one-touch keys) or via the intuitive operation in day or night mode, AmaTron 4 offers maximum user friendliness. Via a finger swipe or via the App carousel, one quickly gets from application to application and to the clearly and simply structured operator terminal. The practical MiniView, a freely configurable status bar and also an integrated light bar make the use of AmaTron 4 especially clear and comfortable.

Benefits of AmaTron 4:
• Automatic full screen mode of the 8" multi-touch colour display when not being touched
• Practical MiniView concept
• Operation via the touch display or via soft keys
• Especially intuitive and user-friendly
• Field-related documentation
• Practice-oriented and intelligent menu guidance
• Day and night mode

Terminal features
• ISOBUS compatible with all ISOBUS machinery from AMAZONE and from other manufacturers
• Tractor ECU function for retrofit to a non-ISOBUS tractor (power, speed, PTO speed, GPS geometry…)
• Two 2.0 USB interface ports for data exchange
• Interface for the connection of sensors via SCU-L adapter (e.g. for N-Sensors)
• GPS interface
• Analogue video input (camera connection)

The following applications are possible
• GPS-Maps&Doc (optional):
   - Task Controller – job management and application maps in ISO-XML file format
   - processing of application maps in shape file format
• GPS-Track (optional) – parallel steering aid
• GPS-Switch basic (optional) – automatic part-width section control of up to 16 part-width sections
• GPS-Switch pro (optional) – automatic part-width section control of up to 128 part-width sections
• AmaCam (optional) – Software licence for a camera of automatic reversing detection

AmaPad – The especially comfortable way to control agricultural machinery

Amapad

AmaPad features a high-resolution, high-contrast and low-reflection 12.1" multi-touch colour display. The operation of AmaPad is carried out solely via touch. With the practical “MiniView concept”, applications which aren’t being actively operated at that moment but need to be monitored are clearly displayed at the side. When needed these can be enlarged via “a finger swipe”. The possibility to individualise a “dashboard panel” with the displays of choice rounds up the user ergonomics. In addition to GPS-Switch part-width section control with GPS-Track pro also a professional parallel steering aid with integrated light bar is installed as standard.

Benefits of AmaPad:
• Particularly low-reflection, high contrast, large 12.1" multi-touch colour display
• Standard high-tech equipment level with GPS-Maps pro, GPS-Track pro and GPS-Switch pro
• Extended MiniView concept
• Upgrade to automatic steering is possible thanks to the automatic GPS-Track Auto track guidance
• Day and night mode

Terminal features
• ISOBUS compatible with all ISOBUS machinery from AMAZONE and from other manufacturers
• Two 2.0 USB interface ports for data exchange
• WLAN module (via USB adapter)
• Remote servicing via the internet possible
• Interface for the connection of sensors via SCU-L adapter (e.g. for N-sensors)
• GPS-interface
• Light sensor for the optimum adjustment of the display

The following applications are possible:
• Task Controller – job management and application maps in ISO-XML file format
• GPS-Maps pro – processing of application maps in the shape file format
• GPS-Switch pro – automatic headland and part-width section control of up to 128 part-width sections
• GPS-Track pro – parallel steering aid with integrated light bar
• GPS-Track Auto – automatic track guidance (only on Pantera)